Table of Contents
Advertisement
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Note these restrictions on port triggering:
•
Only one PC can use a port triggering application at any time.
•
After a PC has finished using a port triggering application, there is a short time-out period
before the application can be used by another PC. This time-out period is required so the UTM
can determine that the application has terminated.
Note: For additional ways of allowing inbound traffic, see
"Inbound Rules (Port Forwarding)" on page
To add a port triggering rule:
1. Select Network Security > Port Triggering from the menu. The Port Triggering screen
displays.
(Figure 5-28
Figure 5-28
2. Below Add Port Triggering Rule, enter the settings as explained in
Firewall Protection
shows a rule in the Port Triggering Rule table as an example.)
v1.0, September 2009
5-6.
Table 5-10 on page
5-46.
5-45
Advertisement
Table of Contents
Troubleshooting
