Introduction
This quick start guide provides basic wireless configuration
information for the ProSafe UTM9S. For information about advanced
wireless features, and for complete configuration steps, see the
reference manual at
Default Wireless Settings
The default wireless settings work well for most wireless networks,
but you must configure the country of operation and wireless security.
The country is initially set to the default country for the world region
where the UTM is sold. You must select the actual country of
operation from the country list. The countries in each region are listed
in alphabetic order. You must also check the correct security setting
for your country.
These are the default settings:
Item
Wireless radio
Region
Country
downloadcenter.netgear.com
Description
Enabled
Not configurable. It is set to the region in
which you purchased the wireless UTM.
The selection is limited to the countries in the
region in which you purchased the wireless
UTM. The default regional settings are:
• Africa. Algeria
• Asia. Azerbaijan
• Europe. Albania
• Middle East. Bahrain
• North America, Latin America, and The
Caribbean. United States
• Oceania. Australia
4
.