NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 260

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
2. In the upper left of the Policy Editor window, click the New Connection icon (the first icon on
the left) to open a new connection. Give the new connection a name; in this example, we are
using ModeConfigTest.
Figure 7-28
3. Enter the settings as explained in
Table 7-17. Security Policy Editor: Remote Party, Mode Config Settings
Setting
Connection Security
ID Type
Subnet
Mask
Protocol
7-50
Table 7-17.
Description (or Subfield and Description)
Select the Secure radio button. If you want to connect manually only, select the
Only Connect Manually checkbox.
From the pull-down menu, select IP Subnet.
Enter the LAN IP subnet address that you specified on the Add Mode Config
Record in the Local IP Address field. If you left the Local IP Address field blank,
enter the UTM's default IP subnet address. In this example, we are using
192.168.1.0.
Enter the LAN IP subnet mask that you specified on the Add Mode Config
Record in the Local Subnet Mask field. If you left the Local Subnet Mask field
blank, enter the UTM's default IP subnet mask. In this example, we are using
255.255.255.0.
From the pull-down menu, select All.
Virtual Private Networking Using IPsec Connections
v1.0, September 2009