ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
To set Web access exception rules:
1. Select Application Security > Block/Accept Exceptions from the menu. The Block/Accept
Exceptions screen displays. This screen shows the Exceptions table, which is empty if you
have not specified any exception rules.
Exceptions table as an example.)
Figure 6-18
2. Under the Exceptions table, click the add table button to specify an exception rule. The Add or
Edit Block/Accept Exceptions screen displays.
Figure 6-19
6-42
(Figure 6-18
shows three exception rules in the
Content Filtering and Optimizing Scans
v1.0, September 2009