Table of Contents
Advertisement
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 6-11. Trusted Hosts Settings (continued)
Setting
Description (or Subfield and Description)
Hosts
This field contains the trusted hosts for which scanning is bypassed. To add a host to this
field, use the Add Host field or the Import from File tool (see below). You can add a
maximum of 200 URLs.
delete
export
Add Host
Type or copy a trusted host in the Add Host field. Then, click the add table button to add
the host to the Host field.
Import from
To import a list with trusted hosts into the Host field, click the Browse button and navigate
File
to a file in .txt format that contains line-delimited hosts (that is, one host per line). Then,
click the upload table button to add the hosts to the Host field.
Note: Any existing hosts in the Host field are overwritten when you import a list of hosts
from a file.
4. Click Apply to save your settings.
Configuring FTP Scans
Some malware threats are specifically developed to spread through the FTP protocol. By default,
the UTM scans FTP traffic, but you can specify how the UTM scans FTP traffic and which action
is taken when a malware threat is detected.
Note: The UTM does not scan password-protected FTP files.
Content Filtering and Optimizing Scans
To delete one or more hosts, highlight the hosts, and click the delete table
button.
To export the hosts, click the export table button and follow the instructions of
your browser.
v1.0, September 2009
6-39
Advertisement
Table of Contents
Troubleshooting
