NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 263

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 7-18. Security Policy Editor: My Identity, Mode Config Settings (continued)
Setting
ID Type
Secure Interface
Configuration
Internet Interface
7. Click on the disk icon to save the configuration, or select File > Save from the Security Policy
Editor menu.
8. In the left frame, click Security Policy. The screen adjusts.
Figure 7-30
Virtual Private Networking Using IPsec Connections
Description (or Subfield and Description)
From the pull-down menu, select Domain Name. Then, below, enter the
remote FQDN that you specified in the UTM's Mode Config IKE policy. In this
example, we are using utm25_remote.com.
Select Preferred from the Virtual Adapter pull-down menu.
Leave the default setting, which is the Any selection from the Name pull-down
menu.
v1.0, September 2009
7-53