System Log Messages; System Startup; Reboot - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

System Log Messages

This section describes log messages that belong to one of the following categories:
• Logs that are generated by traffic that is meant for the UTM.
• Logs that are generated by traffic that is routed or forwarded through the UTM.
• Logs that are generated by system daemons NTP, the WAN daemon, and others.

System Startup

This section describes log messages generated during system startup.
Table C-2. System Logs: System Startup
Message
Explanation
Recommended Action

Reboot

This section describes log messages generated during a system reboot.
Table C-3. System Logs: Reboot
Message
Explanation
Recommended Action
C-2
Jan 1 15:22:28 [UTM] [ledTog] [SYSTEM START-UP] System Started
Logs that are generated when the system is started.
None
Nov 25 19:42:57 [UTM] [reboot] Rebooting in 3 seconds
Logs that are generated when the system is rebooted from the Web
Management Interface.
None
v1.0, September 2009
System Logs and Error Messages