Table of Contents
Advertisement
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
For more information about QoS profiles, see
page
5-33.
Assigning Bandwidth Profiles
By applying a QoS profile, the WAN bandwidth does not change. You change the WAN bandwidth
that is assigned to a service or application by applying a bandwidth profile. The purpose of
bandwidth profiles is to provide a method for allocating and limiting traffic, thus allocating LAN
users sufficient bandwidth while preventing them from consuming all the bandwidth on your
WAN links.
For more information about bandwidth profiles, see
Monitoring Tools for Traffic Management
The UTM includes several tools that can be used to monitor the traffic conditions of the firewall
and content filtering engine and to monitor the users' access to the Internet and the types of traffic
that they are allowed to have. See
a description of these tools.
System Management
System management tasks are described in the following sections:
•
"Changing Passwords and Administrator
•
"Configuring Remote Management Access" on page
•
"Using an SNMP Manager" on page
•
"Managing the Configuration File" on page
•
"Updating the Firmware" on page
•
"Updating the Scan Signatures and Scan Engine Firmware" on page
•
"Configuring Date and Time Service" on page
Changing Passwords and Administrator Settings
The default administrator and default guest passwords for the Web Management Interface are both
password. NETGEAR recommends that you change these passwords to more secure passwords.
You can also configure a separate password for the guest account.
Network and System Management
"Creating Quality of Service (QoS) Profiles" on
"Creating Bandwidth Profiles" on page
"Monitoring System Access and Performance" on page 11-1
Settings" on this page.
10-14.
10-15.
10-18.
10-24.
v1.0, September 2009
10-12.
10-21.
5-36.
for
10-9
Advertisement
Table of Contents
Troubleshooting
