ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Viewing Status Screens
The UTM provides real-time information in a variety of status screens that are described in the
following sections:
•
"Viewing System
•
"Viewing Active VPN Users" on page
•
"Viewing VPN Tunnel Connection Status" on page
•
"Viewing Port Triggering Status" on page
•
"Viewing the WAN Ports Status" on page
•
"Viewing Attached Devices and the DHCP Log" on page
•
"Viewing the DHCP Log" on page
Viewing System Status
The System Status screen provides real-time information about the following important
components of the UTM:
•
CPU, memory, and hard disk status, and the number of active connections per protocol.
•
Firmware versions and update information of the UTM, software versions and update
information of the components, license expiration dates for each type of license, and hardware
serial number.
•
WAN and LAN port information.
•
Interface statistics.
To view the System Status screen, click Monitoring > System Status. Because of the size of the
System Status screen, it is divided and presented in this manual in three figures
page
11-21,
Figure 11-11 on page
examples for the UTM25), each with its own table that explains the fields. For the UTM25, the
System Status screen shows information for both the WAN1 and WAN2 port. For the UTM10, the
System Status screen shows information for the single WAN port.
11-20
Status" on this page.
11-24.
11-31.
11-22, and
v1.0, September 2009
11-24.
11-26.
11-27.
11-29.
Figure 11-12 on page
Monitoring System Access and Performance
(Figure 11-10 on
11-23, all of which show