Pairing Your Cisco Spa525G2 With A Bluetooth-Enabled Mobile Phone; Initiating Pairing From The Ip Phone - Cisco SPA525G User Manual

Using Advanced Phone Features
Using the IP Phone With Your Bluetooth-Enabled Mobile Phone
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled
Mobile Phone
You can initiate pairing from the Cisco SPA525G2 or from your mobile phone.
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1. 1

Initiating Pairing from the IP Phone

The Cisco SPA525G2 connects to one Bluetooth device at a time. If multiple
Bluetooth devices are in range of the Cisco SPA525G2, the order of devices in the
Bluetooth Configuration > Bluetooth Profiles list is used, and the device with a
higher priority is activated first.
Enable Bluetooth as described in the
Press Setup.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Handsfree—Your Cisco SPA525G2 operates as a handsfree device with a
Bluetooth-enabled mobile phone.
• Phone—Your Cisco SPA525G2 pairs with a Bluetooth headset only. Choose
this option if you do not use the IP phone with a Bluetooth–enabled mobile
phone.
• Both—Your Cisco SPA525G2 operates with your Bluetooth-enabled mobile
phone or Bluetooth headset. (See
section on page 18
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for the Bluetooth device.
"Enabling Bluetooth" section on page
"Connecting Bluetooth Headsets"
for more information on Bluetooth headsets.)
4
61.
62