Initiating Pairing From The Cisco Spa 525G2 - Cisco SPA 525G User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
NOTE
STEP 8
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)

Initiating Pairing from the Cisco SPA 525G2

Enable Bluetooth as described in the
525G2)" section on page
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
•
Handsfree—Your Cisco SPA 525G2 will operate as a handsfree device with
a Bluetooth-enabled mobile phone.
•
Both—Your Cisco SPA 525G2 will operate with your Bluetooth-enabled
mobile phone or operate with a Bluetooth headset. (See
Bluetooth Headsets" section on page 18
headsets.)
Your Cisco SPA 525G2 will connect to only one device at a time (either
NOTE
the Bluetooth headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your mobile phone.
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset may not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
In the Select a Bluetooth Device to Pair list, select the mobile phone to which you
want to pair and press Connect.
"Enabling Bluetooth (Cisco SPA 525G/
65.
"Connecting
for more information on Bluetooth
4
67