Configuring Audio Input Gain (Cisco Spa 500 Series) - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Features
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
To configure the audio volume settings:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the User tab. You can configure the following settings:
Parameter
Ringer Volume
Speaker Volume
Handset Volume
Headset Volume
Bluetooth Volume
Click Submit All Changes.

Configuring Audio Input Gain (Cisco SPA 500 Series)

You can amplify or deamplify the sound on your phone's handset, headset, and
speakerphone.
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Audio Input Gain (dB), choose the item to configure.
• If you enter a positive value, amplification increases (sound is louder).
• If you enter a negative value, amplification decreases (sound is softer).
• You can enter a value from -6 decibels to +6 decibels. All fields default to
zero.
Description
Sets the volume for the ringer.
Sets the volume for the full-duplex
speakerphone.
Sets the volume for the handset.
Sets the volume for the headset.
Sets the volume for the Bluetooth device.
NOTE Applies to Cisco SPA 525G only.
3
63