Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 97

Part 7 – Appendixes
Retrieving an Email: AT#GETMAIL
Commands
AT#POP3SERV="pop3.domain.com"
Note: POP3 server used
AT#POP3UN="module@domain.com"
Note: POP3 username (not always the complete
email address). It is the POP3 login
AT#POP3PW="password"
Note: POP3 password
AT#POP3PORT="110"
Note: POP3 port
AT#GETMAIL
Note: Retrieve an email
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
Appendix B – Response Message Examples
Responses
OK
OK
OK
OK
OK_Info_Mail
Note: The software switches from command mode to
data mode for receiving the email content.
Data
Data
.
Note: At the end of data, the [CR][LF] . [CR][LF]
sequence notifies the end of the data mode
OK
Note: The email is successfully retrieved
97