Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 44

Part 2 – Commands for the SocketEthernet IP
Chapter 9 – Auto Discovery Commands
A Note about Auto Discovery:
cannot be updated using the Auto Discovery Manager.
Set Commands
#AUTODISC – Auto Discovery On/Off
Definition:
Syntax:
Values:
Default:
#AUTODISCTIMER – Auto Discovery Timer
Definition:
Syntax:
Values:
Default:
#AUTODISCPORT – Auto Discovery Port
Definition:
Syntax:
Values:
Default:
#AUTODISCHOST – Set Auto Discover Host Name
Definition:
Syntax:
Values:
Default:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
for the SocketEthernet IP
(MT100SEM-IP)
Auto Discovery will broadcast information; however, at this time, the information
This command turns Auto Discovery On or Off.
Set Value: AT#AUTODISC=<value>
View Value: AT#AUTODISC? or AT#VAUTODISC, AT#VALL
0 OFF
1 ON
1
This command sets the Auto Discovery timer.
Set Value: AT#AUTODISCTIMER=<value>
View Value: AT#AUTODISCTIMER? or AT#VAUTODISC, AT#VALL
0 to 60 seconds
10
This command sets the Auto Discovery port.
Set Value: AT#AUTODISCPORT=<value>
View Value: AT#AUTODISCPORT? or AT#VAUTODISC, AT#VALL
0 to 65535
1020
This command sets the Host Name that will appear in the Auto Discovery Manager.
Set Value: AT#AUTODISCHOST ="<value>"
View Value: AT#AUTODISCHOST? or AT#VAUTODISC or AT#VALL
Alphanumeric ASCII text string up to 120 characters.
MT100SEM
Chapter 9 – Auto Discovery Commands for the MT100SEM-IP
44