Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 56

Part 3 – Commands Wi-Fi Devices
Chapter 13 – WLAN Commands for the
SocketWireless Wi-Fi (MT810SWM-IP)
Set Commands
#WLANSECURITYMODE – Security Mode of WLAN Module
Description:
Syntax:
Values:
Default:
#WLANNETWORKMODE – WLAN Network Mode
Description:
Syntax:
Values:
Default:
#WLANCOUNTRYCODE – Country Code
Description:
Syntax:
Values:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
Sets the Wireless LAN security mode.
Note: The module must be reset to put the command into effect.
Set Value: AT#WLANSECURITYMODE =<value>
View Value: AT#WLANSECURITYMODE?
0 Security Disable
1 WEP64 Security
2 WEP128 Security
3 WPA Security
4 WPA2 Security
0 Security Disable
Sets the wireless LAN network mode.
Note: The module must be reset to put the command into effect.
Set Value: AT#WLANNETWORKMODE =<value>
View Value: AT#WLANNETWORKMODE?
0 Infrastructure mode
1 Ad – Hoc mode
0 Infrastructure mode
Sets country code. Different countries have different restrictions on Wireless LAN parameters like
operating channels and transmit power. To make it operable, the country code can be set by
using this AT command.
Note: The module must be reset to put the command into effect.
Set Value: AT#WLANCOUNTRYCODE ="<value>"
View Value: AT#WLANCOUNTRYCODE?
Country Code FCC - US:
AT#WLANCOUNTRYCODE="DOMAIN_FCC"
Supported Channels - Channel 1 to channel 11
Country Code IC - Canada:
AT#WLANCOUNTRYCODE="DOMAIN_IC"
Supported Channels - Channel 1 to channel 11
Country Code ETSI - Europe:
AT#WLANCOUNTRYCODE="DOMAIN_ETSI"
Supported Channels - Channel 1 to channel 13
Chapter 13 – WLAN Commands for the SocketWireless Wi-Fi (MT810SWM-IP)
56