Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 2

Universal IP AT Commands Reference Guide for the following products:
SocketModem
SocketModem
SocketModem
SocketModem
SocketEthernet IP
SocketWireless
MultiModem
PN S000457G, Version G
Copyright
This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech
Systems, Inc. All rights reserved.
Copyright © 2008-2009 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaim
any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves
the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech
Systems, Inc. to notify any person or organization of such revisions or changes.
Revisions
Revision Level
E
F
G
Note: This product used the FreeRTOS.org real time kernel. The FreeRTOS.org source code can be obtained by visiting
http://www.FreeRTOS.org
Trademarks
Multi-Tech Systems, Inc. registered trademarks include SocketModem, MultiModem and the Multi-Tech logo.
SkyTraq is a trademark of SkyTraq Technology, Inc.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
Phone: 763-785-3500 or 800-328-9717
Fax: 763-785-9874
Internet Address:
Technical Support
Country
Europe, Middle East, Africa:
U.S., Canada, all others:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
®
iCell (MTSMC-G2-IP, MTSMC-G2-GP)
®
IP (MT5656SMI-IP) This SocketModem uses these commands when it is in IP mode.
®
IP (MT5692SMI-IP) This SocketModem uses these commands when it is in IP mode.
®
GPRS (MTSMC-G-F4-IP)
®
(MT100SEM-IP)
® ®
Wi-Fi (MT810SWM-IP)
®
iCell (MTCMR-G/C/H/E) This MultiModem uses these commands when it is in IP mode.
Date Description
02/20/09 Added the MultiModem iCell to the list of products that use this command set. Updated the
syntax for the #AUTHENT command. Updated +IPR command. Added a note after
#DNSSERV2.
06/24/09 Made one correction on page 27 when FTP was cited instead of TCP in the #OTCP.
Removed acronym UIP used for Universal IP. Change default for +IRP to 115200; also,
listed speeds at 300 to 921600. Moved Telnet commands to "MT100SEM-IP Only"
chapter. Added new command AT#VSTATE.
07/15/09 Modified PINGNUM. Added new commands: #ETHIFSTATUS, #UDPDLEMODE. Added
the SocketModem MT5692SMI to list of products that use this command set.
07/31/09 Moved #PERSISTENTSOCKET, #RESET, #AUTORESET from Chapter 10 to Chapter 7.
08/21/09 Added commands for MT810SWM-IP. Reorganized the chapters. Added GPS commands.
09/01/09 Added GPIO Chapter.
11/03/09 Updated for new software and other changes.
11/20/09 Updated GPS Message Syntax and Message Examples. Added GPS Configuration
Examples.
12/07/09 Added GPS Application Note.
01/25/10 Added an important note about syntax to
http://www.multitech.com
By Email
support@multitech.co.uk
support@multitech.com
#PUTMAIL.
By Phone
+(44) 118 959 7774
800-972-2439 or 763-717-5863
Copyright and Technical Support
2