Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 43

Part 2 – Commands for the SocketEthernet IP
Display Commands
#ETHIFSTATUS – View Network Interface Settings
Description:
Syntax:
Values:
Display Example:
#VDNS – Display Configuration of DNS Servers
Description:
Syntax:
Values:
#VIP – View Address Settings
Description:
Syntax:
Values:
Display Example:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
Display the address settings.
AT#ETHIFSTATUS
None
INTERFACE: UP
LINK: UP
IPADDR: 192.168.2.3
IPGATEWAY: 192.168.2.1
IPNETMASK: 255.255.255.0
MACADDR: 00:00:00:00:00:00
DNSSERV1: 0.0.0.0.
DNSSERV2: 0.0.0.0.
DNSSERV3: 0.0.0.0.
DNSSERV4: 0.0.0.0.
This command the TCP/IP stack to display all AT# parameters related to the configuration of the
DNS servers.
View: AT#VDNS
None
Displays the address settings.
This command displays the programmed IP settings. To see IP settings in use, including
Note:
DHCP parameters, use the #ETHIFSTATUS command.
AT#VIP
None
The order and content is as follows:
DHCP (Enable/Disable)
IP address
Subnet Mask
Default Gateway
Speed setting (see #EMACSPD command)
MAC address
Chapter 8 – General Commands for SocketEthernet IP (MT100SEM-IP)
43