Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 71

Part 4 – Commands for the SocketModem iCell, SocketModem IP, SocketModem GPRS and MultiModem iCell
#DIALSELECT – Set Internet Connection Number
Definition:
Syntax:
Values:
Default:
#ISPPW – Set ISP Password
Definition:
Syntax:
Values:
Default:
#ISPUN – Set ISP User Name
Definition:
Syntax:
Values:
Default:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
The value of this command determines the number called to establish an Internet connection. It
configures the TCP/IP stack software to use the primary dial-up number or the secondary dial-up
number.
Set Value: AT#DIALSELECT=<value>
Get Value: AT#DIALSELECT? or AT#VPHY, AT#VALL
1 Use primary dial-up number.
2 Use secondary dial-up number
1
This parameter sets the password for the ISP account. When communication is initiated and once
the physical (modem) connection has been established with the ISP, the TCP/IP stack software
must provide the ISP with the password associated with the account to be used.
Set Value: AT#ISPPW="<value>"
Get Value: AT#ISPPW? or AT#VPPP, AT#VALL
Alpha-numeric ASCII text string up to 64 characters.
None
This parameter sets the user name of the ISP account. When communication is initiated and the
physical (modem) connection has been established with the ISP, the TCP/IP stack software must
provide the ISP with the user name associated with the account to be used.
Set Value: AT#ISPUN="<value>"
Get Value: AT#ISPUN? or AT#VPPP, AT#VALL
Alpha-numeric ASCII text string up to 64 characters.
None
Chapter 14
71