Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 35

Part 1 – AT Commands for All Universal IP Devices
Display Command
#VTCP – Display TCP Parameters
Definition:
Syntax:
Example:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
This command directs the TCP/IP stack to display all the AT# parameters related to the TCP
socket configuration.
AT#VTCP=id or AT#VTCP
Note: If you use AT#VTCP=id, the parameters for profile 1 or profile 2 will display. If you use
AT#VTCP, the parameters for both Profile 1 and Profile 2 will display.
Command
AT#VTCP
Note: View TCP parameters
of the TCP socket 2
Possible Responses
#DLEMODE: 1 , 1
#TCPSERV: 1 , "... "
#TCPPORT: 1 , 0
#TCPTXDELAY: 1 , 100
#DLEMODE: 2 , 1
#TCPSERV: 2 , "..."
#TCPPORT: 2 , 0
TCPTXDELAY: 2 , 100
OK
Chapter 5 – TCP Commands
35