Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 74

Part 4 – Commands for the SocketModem iCell, SocketModem IP, SocketModem GPRS and MultiModem iCell
#PPPMODE – Set TCP/IP Behavior
Definition:
Syntax:
Values:
Default:
#PPPMYIP – Set IP Address When Using PPP
Definition:
Syntax:
Values:
Default:
#PPPPEERIP – Set IP Address for Remote PPP
Definition:
Syntax:
Values:
Default:
#PPPSERVUN – Set User Name for Remote PPP Client
Definition:
Syntax:
Values:
Default:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
The TCP/IP stack can manage the access layer in different ways. This parameter selects the way
the TCP/IP stack must run once the physical is layer successfully established.
Set Value: AT#PPPMODE=<value>
Get Value: AT#PPPMODE? or AT#VPPP, AT#VALL
3 Standard PPP. The TCP/IP stack behaves as a PPP client for outgoing calls and as a PPP
client for incoming calls.
3
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter
setting), it is in charge of the IP address attribution mechanism.
Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP
stack for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the
peer that has been previously stored in the TCP/IP stack parameters. If the remote accepts this
address, the IP link is then established.
This parameter defines the IP address to be attributed to the TCP/IP stack when the PPP Server
mode is running.
Set Value: AT#PPPMYIP=<value>
Get Value: AT#PPPMYIP? or AT#VPPP, AT#VALL
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).
0.0.0.0
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter
setting), it is in charge of the IP address attribution mechanism.
Once the PPP authentication is successfully achieved, the remote PPP peer asks the TCP/IP
stack for an IP address. Then the related PPP layer, called IPCP, suggests an IP address to the
peer that has been previously stored in the TCP/IP stack parameters. If the remote accepts this
address, the IP link is then established.
This parameter defines the IP address to be attributed to the remote PPP peer when the PPP
Server mode is running.
Set Value: AT#PPPPEERIP=<value>
Get Value: AT#PPPPEERIP? or AT#VPPP, AT#VALL
32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx).
0.0.0.0
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter), it
checks the remote PPP client login/password before granting access to the server.
This parameter defines the user name that must be specified by the remote PPP client.
Set Value: AT#PPPSERVUN=<value>
Get Value: AT#PPPSERVUN? or AT#VPPP, AT#VALL
Alpha-numeric ASCII text string up to 64 characters.
None
Chapter 14
74