Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 55

Part 3 – Commands for Wi-Fi Devices
#TELNETPASSWORD – Set Telnet Password
Description:
Note:
Syntax:
Display:
Default:
Example:
Display Command
#VTELNET – View Telnet Settings
Description:
Syntax:
Display:
Example:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
Sets Telnet password.
The module must be reset to put the command into effect.
AT# TELNETPASSWORD = "<64 char string>"
AT# TELNETPASSWORD? or AT#VTELNET or AT#VALL Displays the password (64 char
string) or all Telnet settings or all values.
" "
AT#TELNETPASSWORD?
admin
OK
Displays all Telnet settings.
AT# VTELNET
Displays all Telnet settings.
at#vtelnet
#TELNET: 0
#TELNETPORT: 23
#TELNETUSER: "admin"
#TELNETPASSWORD: "admin"
OK
Chapter 12 – Telnet Commands for the SocketWireless Wi-Fi (MT810SWM-IP)
55