Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 84

Part 6 – Commands for GPS-Enabled Devices
#GPSGPGLL – Enable/Disable GPGLL Message
Definition:
Syntax:
Values:
Default:
Result Codes:
#GPSGPGSA – Enable/Disable GPGSA Message
Definition:
Syntax:
Values:
Default:
Result Codes:
#GPSGPGSV – Enable/Disable GPGSV Message
Definition:
Syntax:
Values:
Default:
Result Codes:
#GPSGPRMC – Enable/Disable GPRMC Message
Definition:
Syntax:
Values:
Default:
Result Codes:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
This command enables or disables the reporting of NMEA GPGGA messages.
Set Value: AT#GPSGPGLL =<value>
View Value: AT#GPSGPGLL? or AT#VGPS or AT#VALL
0 Disable
1 Enable
0
OK
Otherwise ERROR
This command enables or disables the reporting of NMEA GPGSA messages.
Set Value: AT#GPSGPGSA =<value>
View Value: AT#GPSGPGSA? or AT#VGPS or AT#VALL
0 Disable
1 Enable
0
OK
Otherwise ERROR
This command enables or disables the reporting of NMEA GPGSV messages.
Set Value: AT#GPSGPGSV =<value>
View Value: AT#GPSGPGSV? or AT#VGPS or AT#VALL
0 Disable
1 Enable
0
OK
Otherwise ERROR
This command enables or disables the reporting of NMEA GPRMC messages.
Set Value: AT#GPSGPRMC =<value>
View Value: AT#GPSGPRMC? or AT#VGPS or AT#VALL
0 Disable
1 Enable
0
OK
Otherwise ERROR
Chapter 16 – Commands for GPS-Enabled Devices
84