Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 49

Part 3 – Commands for Wi-Fi Devices
#IPRELEASE – Release a DHCP Address Assigned by the Server
Description:
Syntax:
Response:
#IPRENEW – Renew the DHCP Information from the Server
Description:
Syntax:
Response:
#IPQUERY – Give a Domain Name
Description:
Syntax:
Response:
Values:
Default:
#IPRESOLV – To Observe Whether There Is a Connection with DNS or Not
Description:
Syntax:
Values:
Default:
S0= – Automatic Answer
Description:
Syntax:
Values:
Default:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
In order to gracefully release a DHCP address assigned by the server, the module should issue a
command of DHCPRELEASE.
AT#IPRELEASE
AT#IPRELEASE returns OK
The DHCP client can renew the DHCP information from the server. On completion of lease time,
the DHCP client will automatically renew the DHCP information. Before that, if the client wants to
renew the information, it can use this command.
AT#IPRENEW
AT#IPRENEW returns OK
Sends a query to the DNS server to resolve the name.
AT#IPQUERY=<Host Name>
OK
Host name in alpha-numeric string format. Example: www.google.com
None
If the DNS client is successful in resolving the host name, this command shows the IP address of
the resolved host name. If the DNS client fails to resolve, it shows error message.
View: AT#IPRESOLV=<Host Name>
Host name in alpha-numeric string format.
None
Sets automatic answering of TCP or UDP connections.
ATS0=
ATS0=0 Manually answer
ATS0=1 Automatically answer
None
Chapter 10 – IP Commands for the SocketWireless Wi-Fi (MT810SWM-IP)
49