Multitech SocketModem iCell MTSMC-G2-IP At Commands Reference Manual page 16

Part 1 – Commands for All Universal IP Devices
#VALL – Display All Parameters
Note:
Definition:
Syntax:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from Elcodis.com electronic components distributor
The MT100SEM display of Possible Responses differs slightly from the MT5656SMI-IP display.
An example of the MT100SEM Possible Responses screen is included on this page. See the
next page for an example of the MT5656SMI-IP Possible Responses screen.
This command directs the TCP/IP stack to display all AT# parameters. The parameters are
displayed by blocks of categories separated by a <CR><LF> sequence, all at the same time.
AT#VALL
Possible Responses – MT100SEM-IP
FTPGETFILENAME: " "
#
FTPGETPATH: " "
#
#FTPMODE: 0
FTPPORT: 21
#
FTPPUTFILENAME: " "
#
FTPPUTPATH: " "
#
FTPPW: "ftppassword"
#
FTPSERV: " "
#
FTPTYPE: 1
#
FTPUN: "ftplogin"
#
POP3HEADERMODE: 1
#
POP3PORT: 110
#
POP3PW: "password"
#
POP3SERV: "pop3.domain.com"
#
POP3UN: "module@domain.com"
#
DOMAIN: "domain.com"
#
SENDERADDR:
#
"module@domain.com"
SENDERNAME: "Test module"
#
SMTPPORT: 25
#
SMTPPW: " "
#
SMTPSERV: "smtp.domain.com"
#
SMTPUN: " "
#
SMTPAUTH: 1
#
BODY1: " "
#
CCREC1: " "
#
REC1: " "
#
SUBJ1: "Email Subject"
#
BODY2: " "
#
CCREC2: " "
#
REC2: " "
#
SUBJ2: " "
#
BODY3: " "
#
CCREC3: " "
#
REC3: " "
#
SUBJ3: " "
#
#DLEMODE: 1 , 1
" "
#TCPSERV: 1 ,
#TCPPORT: 1 , 0
#TCPTXDELAY: 1 , 100
#DLEMODE: 2 , 1
" "
#TCPSERV: 2 ,
#TCPPORT: 2 , 0
#TCPTXDELAY: 2 , 100
#UDPSERV: 1 , " "
Chapter 1 – General AT Commands
#PINGDELAY: 1
#PINGNUM: 4
#PINGREMOTE: " "
#DHCP: 0
#IPADDR: "192.168.2.3"
#IPGATEWAY: "192.168.2.1"
#IPNETMASK: "255.255.255.0"
#EMACSPD: 0
#DNSSERV1: "0.0.0.0"
#DNSSERV2: "0.0.0.0"
#TELNET: 0
#TELNETPORT: 23
#TELNETUSER: "admin"
#TELNETPASSWORD: " "
+IPR: 115200
+ICF: 2,4
+IFC: 2,2
#AUTODISC: 1
#AUTODISCPORT:1020
#AUTODISCTIMER: 10
#AUTODISCHOST:
"MT100SEM"
#AUTODISCUSER: "admin"
#AUTODISCPASSWORD: " "
V: 1
&S: 0
&C: 0
OK
16