Part 4 – Commands for the SocketModem iCell, SocketModem IP, SocketModem GPRS and MultiModem iCell
#PPPSERVPW – Set Remote PPP Client Password
Definition:
Syntax:
Values:
Default:
#APNPW – Set Access Point Name Password
Definition:
Syntax:
Values:
Default:
#APNSERV – Set Access Point Name
Definition:
Syntax:
Values:
Default:
#APNUN – Set Access Point User Name
Definition:
Syntax:
Values:
Default:
#GPRSCID – Set PDP Context Identifier
Definition:
Syntax:
Values:
Default:
Universal IP AT Commands Reference Guide (Document S000457G)
Downloaded from
Elcodis.com
electronic components distributor
When the TCP/IP stack behaves as a PPP server (according to the PPPMODE parameter
setting), it checks the remote PPP client login/password before granting access to the server.
This parameter defines the password that must be specified by the remote PPP client.
Set Value:
AT#PPPSERVPW=<value>
Get Value:
AT#PPPSERVPW? or AT#VPPP, AT#VALL
Alpha-numeric ASCII text string up to 64 characters.
None
#APNPW is the Access Point Name password parameter coming with the APNUN from the GSM
operator and provides GPRS access.
Set Value:
AT#APNPW=<value>
Get Value:
AT#APNPW? or AT#VGPRS, AT#VALL
Alphanumeric ASCII text string up to 120 characters.
None
#APNSERV is the Access Point Name parameter coming from the GSM operator for providing
GPRS access.
Set Value:
AT#APNSERV=<value>
Get Value:
AT#APNSERV? or AT#VGPRS, AT#VALL
Alphanumeric ASCII text string up to 120 characters.
None
#APNUN is the Access Point Name User Name parameter coming with the APNPW from the
GSM operator for providing GPRS access.
Set Value:
AT#APNUN=<value>
Get Value:
AT#APNUN? or AT#VGPRS, AT#VALL
Alphanumeric ASCII text string up to 120 characters.
None
#GPRSCID is the PDP context identifier which specifies a particular PDP context definition. This
parameter is local and may be used in other PDP context-related commands.
Set Value:
AT#GPRSCID=<value>
Get Value:
AT#GPRSCID? or AT#VGPRS, AT#VALL
Numeric between 1 and 4 inclusive.
1
Chapter 14
75
Need help?
Do you have a question about the SocketModem iCell MTSMC-G2-IP and is the answer not in the manual?