Quasonix TIMTER Installation And Operation Manual page 71

Mnemonic Name
Command
SW Frequency
Sweep
SY System Status
63 Quasonix, Inc.
Description
Sweeps the transmitter frequency
between provided limits for the
specified channel(s), with
provided step size, at a fixed rate
Enables independent channel
sweep and start/stop (individually
or together); Channel 3 sets both
channels
Examples:
SW Displays current status
SW ? Displays command help
with status
SW [chan] [enable]
the channel sweep state
SW 1 1 2200.5 2394.5 1.0
Sweep channel 1
between 2200.5 MHz and 2394.5
MHz in 1.0 MHz steps
Refer to section 4.2.3.1.18 for
additional SW command detail
Displays the system status of the
transmitter
The first argument specifies the
period, in milliseconds, between
status updates. Zero (0) disables
continuous monitoring.
The second argument specifies
the number of status lines
between header outputs.
Examples:
SY Displays current status
report settings
SY 0 Disables continuous
reporting
SY 5000 210 Sets status
header output once every 210
status updates
Refer to section 4.2.3.1.19 for
additional SY command detail
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s)
Required
Standard
Toggles
Standard
Setting Factory
Saved? Default
N/A N/A
N/A N/A