Quasonix TIMTER Installation And Operation Manual page 49

Mnemonic Name
Command
CS Clock Source
D2 Dual Input Data
DB Debug
41 Quasonix, Inc.
Description
Report or set the clock source
Unit always reverts to CS 0
(external) at power-up
Examples:
CS Display the current clock
source
CS 0 Set clock source to
external
CS 1 Set clock source to
internal
When set to internal clock source,
the data source is automatically
set to internal in order to have
synchronous, usable data.
CS=1 always overrides CF or
external clock, refer to section 12,
Appendix C for detailed
information
Report status or set dual input
data operation
Examples:
D2 Display dual input data
status
D2 0 Disable dual input data
operation
D2 1 Enable dual input data
operation
Refer to section 4.2.3.1.8 for
additional D2 command detail
Sets the gv.debug level
Each debug occupies one bit;
turn on multiple gv. Debugs Ors
the bits
Examples:
DB ? Displays debug level
DB 5 Sets gv.debug level to
five
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard N
D2 Y
Standard Y
Factory
Default
CS 0
D2 0
DB 0