Quasonix TIMTER Installation And Operation Manual page 43

Mnemonic Name
Command
AIR Analog Input
Reference
Select
AT Attenuator
Control
35 Quasonix, Inc.
Description
Select the reference for the
analog input
Examples:
AIR Report the current value
of AIR
AIR 1 Select 1.65V
AIR 0 Select 0V
This is a read only command;
Use the VP command (if the
option is enabled) to change the
output power.
Uses currently selected channel
from the CH command as the
target and returns a single
response, regardless of
channel—unless channel = 3
AND the two channels have
different values
Example:
AT Report the current value
of AT
3_>AT
3_>Atten currently 31.5 dB
After VP on chan 1 changed to 5:
1_>AT
1_>Atten currently 26.5 dB
1_>CH 3
3_>Cmd Channel set to 3
3_>AT
3_>Chan 1 Atten currently
26.5 dB
3_>Chan 2 Atten currently
31.5 dB
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Clock and Yes
Data
Interface
code D, M,
or S
Standard N/A
Factory
Default
AIR 0
N/A