Quasonix TIMTER Installation And Operation Manual page 58

Mnemonic Name
Command
LD LDPC Encoding
Enable
LP Low Power
50 Quasonix, Inc.
Description
Enable, disable, or show the
current state of the Forward Error
Correction (FEC) / Low Density
Parity Check (LDPC) encoder
Valid options are 0 and 1
Examples:
LD Show the current
encoder state
LD 1 Enable the LDPC
encoder
LD 0 Disable the LDPC
encoder
Automatically disables differential
encoding; *PSK modes default to
DE enabled
Automatically re-enables DE for
SOQPSK mode
Refer to section 4.2.3.1.11 for
additional LD command detail
Report or set low power level
when dual power option enabled
on unit
Valid range is 0-31 in 1 dB steps
or 0-31.5 in 0.5 dB steps,
depending on the transmitter
Examples:
LP Report the present low
power level
LP 3 Set low power to 3
LP Max Set low power to the
highest allowable value for the
unit
LP Min Set low power to the
minimum allowable value for the
unit
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
LD, LD6 Y
*PSK
modes
DP Y
Factory
Default
LD 0
LP 0