Quasonix TIMTER Installation And Operation Manual page 53

Mnemonic Name
Command
FS Frequency Step
HB Heartbeat
H or HE Help
45 Quasonix, Inc.
Description
If no argument is passed, it
reports the current frequency
step. If an argument is passed, it
sets the frequency step size,
which is used by the left and right
square bracket keys (for step
up/step down). The argument
specifies the frequency step in
MHz, with 0.5 MHz being the
smallest available step.
Valid range is 0.000000 MHz to
3000.000000 MHz
Examples:
FS Display the current
frequency step
FS 1 Frequency step = 1 MHz
Controls the heartbeat LEDs on
the board; the LEDs function
based on user selection
Examples:
HB Displays current state
HB 1 LEDs Off
HB 2 LEDs blinking
HB 3 Binary count cycling
HB 4 LEDs match RF state on
the channel
Displays a list of the most
commonly used commands
Commands require a carriage
return at the end of the line and
may also accept parameters
Some commands may not be
enabled depending on required
options
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard Y
Standard Y
Standard N/A
Factory
Default
FS 10
HB 3
N/A