Quasonix TIMTER Installation And Operation Manual page 64

Mnemonic Name
Command
PR or RE Restore Defaults
PSTP Power Level
Step
QA Query All
QC Internal Clock
Rate
56 Quasonix, Inc.
Description
Restores factory default
parameters for the unit
Default is currently the lowest
number modulation supported by
the transmitter with the selected
band and frequency limits
Default power level is Full power
(VP Max)
AT (attenuator) defaults to 0.0 on
both channels
Sets the power level step, in dB,
to be used when the power
stepping commands are issued to
step the power up or down for a
channel
Valid stepping commands are >
< . and , (greater/less than
symbols, period, and comma)
Examples:
PSTP Show current power level
step size
PSTP 1 Set power level step to 1
dB
Displays common device settings
in one compact display
Sets the internal Q clock rate, in
MHz, to be used if the clock
source is set to internal
Value is rate in Mbps (or freq in
MHz)
Examples:
QC Show internal Q clock
rate
QC 10 Set internal Q clock rate
to 10 MHz
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard N/A
Standard N/A PSTP 1.0
Standard N/A
Standard Y
Factory
Default
N/A
N/A
QC 5