Quasonix TIMTER Installation And Operation Manual page 116

TIMTER™ Multi-mode Dual
Telemetry Transmitter
11.1.1 Compact Receiver
The Compact receiver normally requires only a single direct connection of the RF input from a transmitter, as shown
in Figure 49.
Figure 49: Example Bench RF Configuration for Single Transmitter and Compact Receiver
For STC, the Compact receiver still requires only a single RF input but it must be the combined RF outputs from
Channel 1 and Channel 2 of the dual transmitter, as shown in Figure 50.
Quasonix Dual
Transmitter
Quasonix Compact RDMS Receiver
Ch1
Ch2
Two RF Signals from
Signal
Dual Transmitter
Splitter/
Combiner Combined into One Signal
Single RF Signal-Direct
Connect from Transmitter to
Compact Receiver
Figure 50: Example Bench RF Configuration for Dual Transmitter and Compact Receiver
11.1.2 Rack Mount Receiver
A Rack Mount receiver normally requires a splitter to accept the RF input from a transmitter to separate it into
Channel 1 and Channel 2 inputs at the receiver, as shown in Figure 51 and Figure 52.
108 Quasonix, Inc.