Quasonix TIMTER Installation And Operation Manual page 62

Mnemonic Name
Command
MV Digital Board
ADC Voltages
OC Overtemperature
Control Enable
OTA Over-the-Air
Rate
54 Quasonix, Inc.
Description
Displays the digital board voltage
ADC values; PA HVA voltage and
current readings
Example:
MV Display current values
5V Voltage : 5.586 V
28V Current : 0.789 A
28V input : 27.365 V
HVA 2 Current: 0.008 A
HVA 2 voltage: 13.958 V
HVA 1 Current: 0.108 A
HVA 1 voltage: 13.763 V
3.6V RF Voltage : 3.623 V
5.5VDC Voltage : 5.564 V
1.1V Voltage : 1.096 V
3.6V Dig Voltage: 3.626 V
Enables or disables
overtemperature power backoff
control
Examples:
OC 0 Disable Overtemperature
Control
OC 1 Enable Overtemperature
Control
Refer to section 4.2.3.1.15 for
additional OC command detail.
Note: Highly recommended NOT
to disable this feature.
Displays the current baseband
and over-the-air bit rates on each
channel. This information is also
displayed on the RFS output.
OTA Display over-the-air rate
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard N/A
Standard Y
Standard N/A
Factory
Default
N/A
OC 1
N/A