Quasonix TIMTER Installation And Operation Manual page 46

Mnemonic Name
Command
CD Channel Delay
CDE Channel Delay
Enable
38 Quasonix, Inc.
Description
Report or set the channel delay
for the currently active channel(s)
Valid range is 0.0 to 5000.0 in
nanoseconds.
This is useful in STC mode when
the goal is to adjust the delay on
a channel to compensate for
antenna length differences. To
Enable or Disable the delay, use
the CDE command.
Examples:
CD Report the current
channel delay value
CD 500.0 Set the channel
delay to 500 nanoseconds
Enables or disables the use of
the channel delay
This is useful in STC mode when
the goal is to adjust the delay on
a channel to compensate for
antenna length differences. Set
the channel delay value with the
CD command.
Examples:
CDE Show the current CDE
state
CDE 0 Disable channel delay
CDE 1 Enable channel delay
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard Y
Standard Y
Factory
Default
CD 0
CDE 0