Quasonix TIMTER Installation And Operation Manual page 50

Mnemonic Name
Command
DC Duplicate
Channel
DE Differential
Encoding
DIOR Display I/O
Register
Addresses
42 Quasonix, Inc.
Description
Copies settings from one channel
to another (channel 1 to channel
2 or channel 2 to channel 1)
An "are you sure?" prompt
displays before the command
runs.
Examples:
DC Copies Channel 1 to
Channel 2
DC 2 Copies Channel 2 to
Channel 1
Note that channel number is
required if copying from Ch2 to
Ch1
Report or set differential encoding
for the SOQPSK-TG or other
PSK mode (typically disabled for
all other modes)
If LDPC enabled, DE resets to 0.
DE is not valid with MC enabled.
Examples:
DE Report the differential
encoding setting
DE 0 Set differential encoding
OFF
DE 1 Set differential encoding
ON
Displays I/O addresses of
machine registers to make it
easier to debug with IR and IW
commands
Example:
DIOR Displays I/O addresses
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard N/A
Standard Y
Standard N/A
Factory
Default
N/A
DE 1
N/A