Installing Drivers With The Nec Select Install Cd; Installing Drivers From A Remote Cd - NEC PowerMate Professional 9000E Series Service Manual

Installing Drivers with the NEC Select Install CD

Follow these steps to install drivers.
Do not select and install drivers for any hardware that is not
currently installed on the system. Doing so can damage the
operating system.
1. Install the device that will require the new driver before installing the driver.
2. With the operating system running, insert the NEC Select Install CD into the
CD-ROM drive.
3. Access the subdirectory that corresponds to the driver you wish to install.
4. Double click the
install.
5. Follow the prompts in the installation wizard to install the driver.
6. Repeat steps 1 through 5 for each driver you wish to install.
7. Restart the computer to ensure that the installation process completes
successfully.

Installing Drivers from a Remote CD

If the computer is connected to a network and set up to access a shared CD-
ROM drive, a System Administrator can install the optional drivers from the
NEC Select Install CD in the remote CD-ROM drive.
Do not select and install drivers for any hardware that is not
currently installed on the system. Doing so can damage the
operating system.
1. Install the device that will require the new driver before installing the driver.
2. Insert the NEC Select Install CD into the shared CD-ROM drive.
3. Do a map connection to the shared CD-ROM drive.
T
From the system with the shared CD-ROM drive, double click
Computer
click on
T
In the popup menu, right click on
appears.
T
In the Properties screen, click
! CAUTION
setup.exe icon corresponding to the driver you wish to
! CAUTION
and right click on the CD-ROM drive. (For example, right
Q: if the shared CD-ROM drive is designated as drive Q.)
Shared As
. The Properties screen
Sharing
.
System Configuration 2-33
My