Supermicro SuperServer SYS-122H-TN User Manual page 44

Maintenance and Component Installation
This chapter provides instructions on installing and replacing main system components for the
SYS-122H-TN server. To prevent compatibility issues, only use components that match the
specifications and/or part numbers given.
Installation or replacement of most components require that power first be removed from the
system. Follow the procedures given in each section.
3.1 Removing Power
3.2 Accessing the System
Removing the Top Cover
3.3 Static-Sensitive Devices
Precautions
3.4 Processor and Heatsink Installation
LGA 4710 Socket E2 Processors
Overview of the Processor Socket
Overview of the Processor Carrier Assembly
Overview of the Processor Heatsink Module
Creating the Processor Carrier Assembly
Assembling the Processor Heatsink Module
Preparing the Processor Socket for Installation
Preparing to Install the PHM into the Processor Socket
Installing the Processor Heatsink Module
Removing the Processor Heatsink Module
3.5 Memory Support and Installation
Memory Support
General Guidelines for Optimizing Memory Performance
DIMM Installation
DIMM Removal
3.6 Motherboard Battery Removal and Installation
Battery Removal
Proper Battery Disposal
SuperServer SYS-122H-TN: Maintenance and Component Installation
Chapter 3:
44
46
47
47
48
48
49
49
50
50
52
53
56
58
59
61
62
66
66
71
71
74
75
75
75