Secure Boot Menu - Supermicro SuperServer SYS-122H-TN User Manual

User Password (Available when "Administrator Password" has been set)
This feature indicates if a user password has been installed. Use this feature to set the user
password which is required to enter the BIOS Setup utility. The length of the password can be
between three and 20 characters long.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system to
check for a password at bootup and upon entering the BIOS Setup utility. The options are
Setup and Always.
Hard Drive Security Frozen
Select Enabled to freeze the Lock Security feature for HDD to protect key data in hard drives
from being altered. The options are Disabled and Enabled.
Lockdown Mode (Available when the DCMS key is activated)
Select Enabled to support the Lockdown Mode, which prevents the existing data or keys stored
in the system from being altered or changed in an effort to preserve system integrity and
security. The options are Disabled and Enabled.

Secure Boot Menu

►Secure Boot
Note: For detailed instructions on configuring Security Boot settings, please refer to the
Security Boot
https://www.supermicro.com/support/manuals.
The following information is displayed:
System Mode
l
Secure Boot
l
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
SuperServer SYS-122H-TN: UEFI BIOS
Configuration
208
User's Guide at