Mac:(Mac Address)-Ipv4 Network Configuration Menu; Mac:(Mac Address)-Ipv6 Network Configuration Menu - Supermicro SuperServer SYS-122H-TN User Manual

Media Detect Count (Available when "Network Stack" is set to Enabled)
Use this feature to set the wait time (in seconds) for the BIOS ROM to detect the presence of a
LAN media either via the Internet connection or via a LAN port. Press the <+> or <-> key on
your keyboard to change the value. The default setting is 1.

MAC:(MAC address)-IPv4 Network Configuration Menu

►MAC:(MAC address)-IPv4 Network Configuration
Configured
Enable this feature to configure network addresses for DHCP, local IP address, local netmask,
local gateway, and local DNS server. The options are Disabled and Enabled.
Enable DHCP (Available when "Configured" is set to Enabled)
Select Enabled to support Dynamic Host Configuration Protocol (DHCP), which allows the
BIOS to search for a DHCP server attached to the network and request the next available IP
address for this computer. The options are Disabled and Enabled.
Local IP Address (Available when "Configured" is set to Enabled and "Enabled DHCP"
is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Configured" is set to Enabled and "Enabled DHCP" is
set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Configured" is set to Enabled and "Enabled DHCP" is
set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local machine.
Save Changes and Exit
Press <Enter> to save changes and exit.

MAC:(MAC address)-IPv6 Network Configuration Menu

►MAC:(MAC address)-IPv6 Network Configuration
►Enter Configuration Menu
The following information is displayed.
SuperServer SYS-122H-TN: UEFI BIOS
191