Download Print this page

Supermicro SuperServer SYS-122H-TN User Manual page 185

Advertisement

Change Settings (Available when "Serial Port 1" above is set to Enabled)
Use this feature to specify the base I/O port address and the Interrupt Request address of serial
port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to serial
port 1. The options are Auto, (IO=3F8h; IRQ=4;), (IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;),
(IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;), (IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;), and (IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;).
Serial Port 2 Configuration Menu
►Serial Port 2 Configuration
Note: It can be "Serial Port 2 Configuration" or "SOL Configuration" based on your system
support.
Serial Port 2/SOL ("Serial Port 2" or "SOL" based on your system support)
Select Enabled to enable serial port 2 (or SOL). The options are Disabled and Enabled.
Device Settings (Available when "Serial Port 2/SOL" above is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of serial port
2 (or SOL).
Change Settings (Available when "Serial Port 2/SOL" above is set to Enabled)
Use this feature to specify the base I/O port address and the Interrupt Request address of serial
port 2 (or SOL). Select Auto for the BIOS to automatically assign the base I/O and IRQ address
to serial port 2 (or SOL). The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h;
IRQ=3,4,5,6,7,9,10,11,12;),
IRQ=3,4,5,6,7,9,10,11,12;), and (IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;).
Serial Port 2 Attribute (Available for Serial Port 2 only)
Select SOL to use serial port 2 as a Serial Over LAN (SOL) port for console redirection. The
options are SOL and COM.
Serial Port Console Redirection Menu
►Serial Port Console Redirection
COM1 (Available when your system supports the serial port of COM1)
Console Redirection
Select Enabled to enable COM port 1 for Console Redirection, which allows a client machine to
be connected to a host machine at a remote site for networking. The options are Disabled and
Enabled.
SuperServer SYS-122H-TN: UEFI BIOS
(IO=2F8h;
IRQ=3,4,5,6,7,9,10,11,12;),
185
(IO=3E8h;

Advertisement

loading
Need help?

Need help?

Do you have a question about the SuperServer SYS-122H-TN and is the answer not in the manual?