Supermicro SuperServer SYS-122H-TN User Manual page 209

►Enter Audit Mode
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
Select Ok to enter the Audit Mode workflow. It will result in erasing the Platform Key (PK)
variables and resetting the system to the Setup/Audit Mode.
►Key Management
Note: This submenu is available when "Secure Boot Mode" is set to Custom.
The following information is displayed:
Vendor Keys
l
Provision Factory Defaults
Select Enabled to install provision factory default settings after a platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
►Restore Factory Keys
Note: This submenu is available when any secure keys have been installed.
Select Yes to restore manufacturer default keys to ensure system security. The options
are Yes and No. Selecting Yes will reset system to the Deployed mode.
►Reset To Setup Mode
Note: This submenu is available when any secure keys have been installed.
This feature resets the system to the Setup Mode. The options are Yes and No.
►Enroll Efi Image
This feature allows the Efi image to run in the secure boot mode, which will enroll the
SHA256 Hash certificate of a PE image into the Authorized Signature Database (DB).
SuperServer SYS-122H-TN: UEFI BIOS
209