Supermicro SuperServer SYS-122H-TN User Manual page 183

Gen5 Link Degradation
Use this feature to enable PCIe Gen5 link degradation. The options are Disabled and Enabled.
Note: The default setting is Enabled when your motherboard supports PCIe Gen5 link.
Otherwise, the default setting is Disabled.
Trusted Computing Menu
►Trusted Computing
Note: This submenu is available when a TPM device is installed and detected by the BIOS.
When a Trusted Platform Module (TPM) device is detected by your system, the following
information is displayed.
TPM 2.0 Device Found
l
Firmware Version:
l
Vendor:
l
Security Device Support
Select Enabled to enable BIOS support for onboard security devices, which are not displayed
in the OS. If this feature is set to Enabled, TCG EFI protocol and INT1A interface will not be
available. The options are Disabled and Enabled.
When "Security Device Support" is set to Enabled and a TPM 2.0 device is detected by the
BIOS, the following information is displayed.
Active PCR banks
l
Available PCR banks
l
* The following features are available when a TPM 2.0 device is detected by the BIOS.
ACPI Settings Menu
►ACPI Settings
NUMA
Use this feature to enable Non-Uniform Memory Access (NUMA) support to minimize memory
access latencies. The options are Disabled and Enabled. This feature is CPU-dependent.
SuperServer SYS-122H-TN: UEFI BIOS
183