Secure Boot Menu - Supermicro SuperServer E300-8D User Manual

Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which provides
compatibility support for traditional legacy BIOS for system boot. The options are Enabled
and Disabled.

Secure Boot Menu


This section displays the contents of the following secure boot features:
•
System Mode
•
Secure Boot
•
Vendor Keys
Secure Boot
Use this item to enable secure boot. The options are Disabled and Enabled.
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and Custom.
Key Management

This submenu allows the user to configure the following Key Management settings.
Factory Default Key Provision
Select Enabled to install the default Secure-Boot keys set by the manufacturer. The options
are Disabled and Enabled.
Enroll All Factory Default Keys

Select Yes to install all default secure keys set by the manufacturer. The options are Yes
and No.
Save All Secure Boot Variables
This feature allows the user to decide if all secure boot variables should be saved.
Platform Key (PK)

This feature allows the user to configure the settings of the platform keys.
75
Chapter 5 BIOS