802.1X Port Authentication; Table 4-32 802.1X Port Authentication Commands - SMC Networks 8708L2 - annexe 1 Management Manual

802.1X Port Authentication

The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
Command
dot1x
system-auth-control
dot1x default
dot1x max-req
dot1x port-control
dot1x
operation-mode
dot1x
re-authenticate
dot1x
re-authentication
dot1x timeout
quiet-period
dot1x timeout
re-authperiod
dot1x timeout
tx-period
show dot1x

Table 4-32 802.1X Port Authentication Commands

Function
Enables dot1x globally on the switch.
Resets all dot1x parameters to their default
values
Sets the maximum number of times that the
switch retransmits an EAP request/identity
packet to the client before it times out the
authentication session
Sets dot1x mode for a port interface
Allows single or multiple hosts on an dot1x
port
Forces re-authentication on specific ports
Enables re-authentication for all ports
Sets the time that a switch port waits after
the Max Request Count has been exceeded
before attempting to acquire a new client
Sets the time period after which a
connected client must be re-authenticated
Sets the time period during an
authentication session that the switch waits
before re-transmitting an EAP packet
Shows all dot1x related information
A
UTHENTICATION
C
OMMANDS
Mode Page
GC 4-108
GC 4-108
IC 4-108
IC 4-109
IC 4-110
PE 4-111
IC 4-111
IC 4-112
IC 4-112
IC 4-113
PE 4-113
4-107