Table of Contents
Advertisement
Command
*
parity
*
speed
*
stopbits
disconnect
show line
*. These commands only apply to the serial port.
line
This command identifies a specific line for configuration, and to process
subsequent line configuration commands.
Syntax
line {console | vty}
• console - Console terminal line.
• vty - Virtual terminal for remote console access (i.e., Telnet).
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as
"VTY" in screen displays such as show users. However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
Table 4-5 Line Commands (Continued)
Function
Defines the generation of a parity bit
Sets the terminal baud rate
Sets the number of the stop bits transmitted
per byte
Terminates a line connection
Displays a terminal line's parameters
L
C
INE
OMMANDS
Mode Page
LC
4-23
LC
4-23
LC
4-24
PE
4-25
NE,
4-25
PE
4-15
Advertisement
Table of Contents
