Dns Commands; Table; Table 4-73 Dns Commands - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE
Example
Console#ping 10.1.0.9
Type ESC to abort.
PING to 10.1.0.9, by 5 32-byte payload ICMP packets, timeout is 5
seconds
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 0 ms
Ping statistics for 10.1.0.9:
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
Approximate round trip times:
Minimum = 0 ms, Maximum = 10 ms, Average = 8 ms
Console#

DNS Commands

These commands are used to configure Domain Naming System (DNS)
services. You can manually configure entries in the DNS domain name to
IP address mapping table, configure default domain names, or specify one
or more name servers to use for domain name to address translation.
Note that domain name services will not be enabled until at least one name
server is specified with the ip name-server command and domain lookup
is enabled with the ip domain-lookup command
Command
ip host
clear host
ip domain-name Defines a default domain name for incomplete
ip domain-list
ip name-server
4-284
I
NTERFACE

Table 4-73 DNS Commands

Function
Creates a static host name-to-address mapping GC
Deletes entries from the host name-to-address

table

host names
Defines a list of default domain names for
incomplete host names
Specifies the address of one or more name
servers to use for host name-to-address
translation
Mode Page
4-285
PE 4-286
GC 4-287
GC 4-288
GC 4-289