Table of Contents
Advertisement
•
Number of Egress Traffic Classes – The number of queue buffers
provided for each port.
Web – Click Priority, Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click Apply.
CLI – This example assigns a default priority of 5 to port 3.
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config-if)#end
Console#show interfaces switchport ethernet 1/3
Information of Eth 1/5
Broadcast threshold:
LACP status:
Ingress rate limit:
Egress rate limit:
VLAN membership mode:
Ingress rule:
Acceptable frame type:
Native VLAN:
Priority for untagged traffic: 0
GVRP status:
Allowed VLAN:
Forbidden VLAN:
Console#
Figure 3-84 Default Port Priority
Enabled, 500 packets/second
Disabled
Disable, 1000M bits per second
Disable, 1000M bits per second
Hybrid
Disabled
All frames
1
Disabled
C
S
LASS OF
ERVICE
1(u),
C
ONFIGURATION
4-170
4-254
4-180
3-207
Advertisement
Table of Contents
