Dot1X Timeout Quiet-Period; Dot1X Timeout Re-Authperiod - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE

dot1x timeout quiet-period

This command sets the time that a switch port waits after the Max Request
Count has been exceeded before attempting to acquire a new client. Use
the no form to reset the default.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
seconds - The number of seconds. (Range: 1-65535)
Default
60 seconds
Command Mode
Interface Configuration (Ethernet Ports 1-8, Port Channel)
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout quiet-period 350
Console(config-if)#

dot1x timeout re-authperiod

This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
Default
3600 seconds
Command Mode
Interface Configuration (Ethernet Ports 1-8, Port Channel)
4-112
I
NTERFACE