Telnet Server Commands; Table 4-14 Telnet Server Commands - SMC Networks 8708L2 - annexe 1 Management Manual

Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format:
https://device:port_number
Example
Console(config)#ip http secure-port 1000
Console(config)#
Related Commands
ip http secure-server (4-43)

Telnet Server Commands

Command
ip telnet server

Table 4-14 Telnet Server Commands

Function
Allows the switch to be monitored or
configured from Telnet; also specifies the port
to be used by the Telnet interface
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-42
4-45