Table 4-2 Configuration Command Modes - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE
• Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and
databits.
• VLAN Configuration - Includes the command to create VLAN
groups.
• Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
"Console(config)#" which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Mode
Line
Access
Control
List
Interface interface {ethernet port |
VLAN
MSTP
4-10
I
NTERFACE

Table 4-2 Configuration Command Modes

Command
line {console | vty}
access-list ip standard
access-list ip extended
access-list ip mask-precedence
access-list mac
access-list mac
mask-precedence
port-channel id| vlan id}
vlan database
spanning-tree
mst-configuration
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
Console(config-if)#
Console(config-vlan)
Console(config-mstp)#
Page
4-14
4-117
4-169
4-229
4-212